Blended Polyester Resin for Outdoor Semi

Basic Info.

Model NO.	6002 & 6006
Acid Value (Mgkoh/G)	55-65 and 18-23
Ratio	90/10 & 96/4
Transport Package	25kg/Bag
Trademark	KINTE
Origin	China
HS Code	3907999000
Production Capacity	80000 Tons Per Year

Product Description

Blended Polyester Resin with Good Leveling for Outdoor Semi-gloss TGIC Powder Coatings6002 and 6006 are high and low acid value polyester resins respectively, which are used in polyester/TGIC powder coating systems. Using 6002 and 6006 to make powder respectively and then dry mixing to make outdoor semi-gloss powder coating.Due to its advantages of no pollution, energy saving, and near-zero VOC emissions, powder coatings have achieved rapid development around the world, with an output of 1.6 million tons in 2017. At present, domestic thermosetting powder coatings are mainly divided into indoor powder coatings and outdoor powder coatings, of which indoor powder coatings are mainly epoxy resin powder coatings, while outdoor powder coatings can be cured by TGIC and Primid. When TGIC is used to cure powder coatings since no small molecular by-products are formed during baking and curing, the surface of the coating is not prone to shrinkage cavities, pinholes, and other problems, and the surface clarity and gloss are high.Although high-gloss powder coatings dominate the market, there is an increasing demand for semi-gloss, low-gloss, and matt products. At present, the preparation of semi-gloss and other low-gloss powder coatings can mainly adopt physical methods and chemical methods. Common methods include adding matting agents, dry mixing matting, and co-extrusion matting. The addition of a matting agent is mainly to add other type resin to polyester resin, which causes two-phase separation and reduces gloss. Since the addition of resin will cause the mechanical properties of the system to decline and the cost to rise significantly, it is less used in outdoor powder coatings. Co-extrusion matting mainly prepares high and low acid value resins and curing agents into matting powder coatings by screw extrusion. During use, there is a phenomenon of unstable gloss, and its market application is also less. Therefore, the current outdoor powder coatings are mainly realized by dry mixing and matting.
Basic Features
Low glossGood weathering resistance Good levelingGood mechanical properties
Recommend Formulation:

Formulation	6002	6006	TGIC	TiO2 R930	BaSO4 44HB	PV-88	Benzoin
I	270	-	30	75	125	3	1.5
II	-	288	12	75	125	3	1.5

Specifications:

Items	6002	6006
Appearance	Pale yellow flake	Pale yellow flake
Acid Number (mgKOH/g)	55~65	18~23
Softening Point (ºC)	105~115	103~113
Glass Transition Temp. (ºC)	~67	~60
Melting Viscosity (200ºC, cone/plate, mPa·s)	3800-5500	4500-6500
Reactivity s (180ºC, TGIC)	30-130	500-900
Curing Requirement	200ºC×10min
Packaging	PE Bags, Net Weight 25kg ± 0.1kg / bag

Specifications II:

Extrusion Condition	Two-screw Extruder	110~120ºC
	Speed of Revolution	500~1200rpm
	Fineness of Powder	<100μm
	Extrude 6002 and 6006 respectively according to the formula, and mix and pulverize in a ratio of 1:1 to make powder.
Application Condition	Electrostatic Spraying With	40~70KV
	Coating Film Thickness	50~70μm
	Degreased Cold-rolled Steel	0.5mm
Film Properties	Gloss (60°)	≤25%
	Bending (φ1mm)	Pass
	Adhesive (1mm, grade)	0
	Pencil Hardness	≥1H
	Impact (50cm)	Direct pass

More Code

Code	Ratio	Cure Cycle	Acid Value (mgKOH/g)	Viscosity (mPa.s/200ºC)	Tg (ºC)	Reactivity (s/180ºC)	Properties
NH6083	90/10	180ºC*10min	80~90	1500~3500	~58	30-90	Fast cure resin. For one shot matt formulations.
NH6685	96/4	180ºC*10min	19~24	4800~6400	~57	220-280
NH6381	93/7	180ºC*10min	47~54	3800~4800	~60	60-120	Dry-blended for low gloss powder coatings with good mechanical properties and flow.
NH6688	96/4	180ºC*15min	19~24	4800~6400	~56	220-280
NH6161	91/9	160ºC*15min	68~76	2500~4500	~59	50-150	Low bake resins. Dry-blended for low gloss powder coatings, with good mechanical properties and flow.
NH6687	96/4	160ºC*15min	24~29	4000~6500	~56	160-260

Remarks: All the polyester resins could be customized to Non-tin (A), anti gas burners (G), tribo gun (T) and anti-blooming (F).
Company Profile:
Kinte Materials Science and Technology Co., Ltd. is subordinate to China Machinery Industry Corporation (a key state-owned enterprise directly managed by SASAC, ranking 284 among the world's top 500 in 2021). It is a national high-tech enterprise under China National Electric Apparatus Research Institute Co., Ltd. (Stock Code: 688128), a listed enterprise on the SSE STAR MARKET. Focusing on the R & D, production, and sales of environmentally friendly coatings (powder coatings, waterborne industrial coatings) and powder coating resins, the company is committed to improving the global market competitiveness of China's environmentally friendly coating industry. Now it has become the leader and promoter in China's technological development of environmentally friendly coatings as well as polyester resins for powder coatings! We have gained ISO9001 and ISO14000, ISO18001, RoHS, UL certification, and QUALICOAT Certificates. Due to the excellent and stable quality, our products always enjoy a high reputation at home and overseas, and were sold to more than 30 countries.The polyester resin branch was founded in 2000, now there are two factories (DongGuan factory and TaiXing Factory) with an annual production capacity of over 80,000 tons, and the annual production capacity reached 120000 tons by the end of 2020, opening the road to global diversified development. Our clients include many top-tier powder manufacturers in the world such as AKZO, PPG, TIGER, PROTECH, NIPPON, OXYPLAST, JOTUN, SHERWIN, VALSPAR, SINTERPLAST, etc.We unremittingly stick to the business principle of "Quality is the life, adhere to first-class technology, first-class quality, first-class cost, and first-class brand". We would like to provide a complete set of services and solutions for both domestic and abroad customers and would like to go forward to a brilliant future with you together.